Resmed Standard Water Chamber for AirSense™ 10 and AirCurve™ 10


Requires Prescription

SKU: 140 Categories: , , Tags: ,

The Standard Resmed Airsense 10 Water Chamber is a replacement chamber designed for use with the AirSense™ 10, Airstart™ 10, and AirCurve™ 10 line of machines by Resmed.


Cleaning and filling should be done weekly by hand using warm water and mild soap. Dry the water chamber out completely once cleaned before reinstalling. Avoid drying in direct sunlight as UV rays can degrade the plastic material. For longer use, use distilled water and empty the chamber once per night. Mineral build-up caused by tap water can degrade your device faster. The water chamber can be opened for cleaning and filling, but it is NOT dishwasher safe.

Replace the Resmed Airsense™ 10 Water Chamber every three to 12 months as needed. You’ll know it is time for a replacement when you feel dryness or irritation, which is caused by pressurized air. For further maintenance instructions, review the documentation that came with your equipment.

Inspect your Resmed Airsense™ 10 reservoir once a month for any cracks, cloudiness, or pitted spots. Consider using household solutions with one part vinegar and 10 parts water to remove any build-up of water deposits or white powder.


Always install your Airsense 10 Water Chamber in your Airsense, Airstart, or Aircurve device to ensure proper functioning. All three devices are compatible for use with an empty water chamber but ONLY while set in Airplane Mode.

For further usage instructions, review the documentation that came with your equipment.

Additional information

Weight 1 lbs
Dimensions 8 × 6 × 4 in